High-Temp Exhaust Pipe Repair Glue

Restore damaged exhaust systems quickly with this high-temperature repair adhesive. Designed to seal cracks, holes, and leaks, this durable repair paste withstands extreme temperatures up to 1100°C (2012°F), making it ideal for automotive and motorcycle exhaust repairs as well as other high-heat metal applications.

🔥 Features

✅ Withstands temperatures from -70°C to 1100°C (-94°F to 2012°F)

✅ Seals cracks, holes, and leaks in metal components

✅ Strong heat-resistant bonding after full curing

✅ Suitable for both cars and motorcycles

✅ Easy-to-apply paste formula

✅ Resistant to vibration and high operating temperatures

🚗 Ideal For

✔ Exhaust pipes

✔ Mufflers

✔ Tailpipes

✔ Exhaust leaks

✔ Oil pans

✔ Fuel tanks

✔ Water tanks

✔ Other high-temperature metal repairs

📋 Specifications

Type: High-Temperature Repair Adhesive

Material: Liquid Repair Paste

Operating Temperature: -70°C to 1100°C (-94°F to 2012°F)

Curing Time:
24 hours at temperatures above 24°C (75°F)
48 hours at temperatures below 24°C (75°F)

🔧 Instructions

Clean and dry the damaged surface before applying the repair paste.

Apply evenly over the damaged area.

Allow the adhesive to cure completely before heavy use.

After application, let the engine idle for approximately 30 minutes to gradually heat and strengthen the repair.

Note: If the damaged gap is larger than 0.5 cm (0.2 in), reinforcing with metal wire mesh is recommended for the best repair results.

📦 Package Includes

1 × High-Temp Exhaust Pipe Repair Glue

⚠️ Notes

Allow sufficient curing time before exposing the repair to high temperatures.

For larger holes or structural damage, reinforcement with metal mesh is recommended.

Slight color differences and measurement variations may occur.

 

 

High Temperature Glue

applicable tempure: -70°C~1100°C / -94°F~2012°F

High Quality Glue

applicable high-quality and powerful repair, ultra-high hardness, high temperature resistance, strong airtightness

Dedicated To Cars And Motorcycles

this glue is specially used for the repair of exhaust pipes, mufflers, mailboxes and other pipes of automobiles and motorcycles

 

Mutiple Uses

this glue is widely used on exhause pipe, vent-pipe, oil pans, car engine, water tank, fuel tank

How To Use

1. Clean all grease, dust on the surface of the exhaust pipe

2. Smear the exhaust pipe glue to the surface of the area to be repaired evenly.

3. Curing under room temperature for at least 24 hours (if the gap's range is exceed 0.5cm, it must be used with wire mesh)

4. Heat cure for 30 minutes (if the surface is blistered, it should be scraped off and re-bonded)